E-ONE-230VAC

DC/AC SINE WAVE INVERTERS 1000VA

e-one 10 – 48/230 is a stand-alone inverter capable of converting a 48 Vdc power source into a pure sine wave of 230 Vac at 50 Hz. This inverter can deliver 1 kVA / 0.8 kW while operating from -20 to 65°C. e-one can be easily rack, wall or desk-mounted. This inverter is available in two versions: regular (DC input only) and by-pass (AC and DC input). In by-pass version, the inverter can automatically switch from the DC source to the AC source if there are problems (with the batteries, charger or distribution). Another way to better secure your critical loads.

Best-in-class solution?  

With dimensions of 1U x 342 mm x 221 mm, this very small inverter occupies just 3,300 cm³.

We also guarantee a maximum ripple voltage of 0.01%, or 0.048V on the DC source. In practical terms, this means almost no disturbances reach your DC load or batteries; a great benefit as disturbances considerably reduce battery life.

To minimize your maintenance costs, E-one has incorporated a variable fan speed for cooling. The fan’s speed changes, or it switches off entirely, according to need. This reduces fouling and other maintenance problems.

Finally, regarding reliability, the e-one inverter is based on our Y-one inverter which has the lowest conceivable failure rate: 0%.

For which application?

e-one is the ideal solution for powering and securing any AC equipment: telecommunication (5G, WiFi repeaters, supervision, maintenance, cooling, security and access for base stations, etc.), mass transport (signalling systems for trains, GSMR along the track, etc.) and many others (CCTV cameras for traffic control system, police radio network, etc.).

 

SPECIFICATIONS TABLE

POWERREG 1000 VA / 800W
EMC (immunity)EN 61000-4-2 up to 6
EMC (emission) (class)EN 55022 (A)
SafetyIEC 60950-1
Cooling / IsolationForced / Doubled
MTBF200 000 hrs
Efficiency DC/AC at 54 VDC0.9
Dielectric strength DC/AC4300 Vdc
RoHSCompliant
VibrationGR63 office vibration 0 to 100 hz-0.1 g / transport vibration 5-100 Hz 0.5 g 100 to 500 hz-1.5 g / Drop test
Operating conditionsSelf adaptive to wide operating conditions and comprehensive table of troubleshooting codes
Altitude above sea without de-rating< 1500 m / derating > 1500 m – 0.8 % per 100 m
Ambient / storage temperature / relative humidity-20 to 50 ° C / -40 to 70 ° C / 95 %, non-condensing
Material (casing)Coated steel
AC OUTPUT POWER
Nominal Output power (VA) / (W)1000 VA / 800 W
Short time overload capacity150 % (15 seconds) within T° range
Admissible load power factor0 lagging to 0 leading
DC INPUT SPECIFICATIONS
Nominal voltage (DC)48 V
Voltage range (DC)40 – 60 V
Nominal current at 800 W / 48 VDC19 A
Maximum input current (for 15 second) / voltage ripple28 A / 2 mV psopho @ 48 V – 80% LOAD
AC OUTPUT SPECIFICATIONS
Nominal voltage (AC*)230 V
Frequency / frequency accuracy50 or 60 Hz / ± 0.01 %
Total harmonic distortion (resistive load)< 1.5 %
Load impact recovery time0.4 ms
Turn on delay20 s
Nominal current. Protected against reverse current4.4 A at 230 VAC
Crest factor at nominal power3 : 1
With short circuit management and protection3 : 1
SIGNALING & SUPERVISION
DisplayFront LED
Alarms output / supervisionDry contact on the front
Remote on / offOn the front

Ask for Assistance

Selecting the right power supply for your application is not a small task. Let our technical sales engineers guide you through the process of choosing the right solution for your needs.

Below some parameters usually required to size and select the right power supply:

  • Power & control requirements
  • Output & Input Voltage / Multioutput Voltage / Variable Voltage
  • Redundancy level
  • Mounting
  • Inrush Current
  • Environmental specifications (Temperature, altitude, vibration, shock)
  • Specific Industries Standards (Railway, Military, Medical)
  • Terminals

Contact Our Team

Contact our team of experienced engineers to discuss your unique power conversion and backup needs. We offer a wide range of highly reliable components that can be integrated and customized to create a solution that meets or exceeds your requirements.

For power automation systems please contact us at power.systems.automation@heliosps.com.au

You may also like...