The SR SmartCharger is designed to recharge your battery in the shortest practicable time with programmable parameters to suit your specific application. Smartsharger 100W.
| Model | Output Voltage¹ (float) | Output Voltage¹ (max boost) | Output Current (continuous) | Min – Max Battery Size2 |
| SR100B12 | 13.8 | 14.7 | 6.7A | 24 – 70 Ah |
| SR100B24 | 27.6 | 29.4 | 3.3A | 12 – 40 Ah |
| SR100B36 | 41.4 | 44.1 | 2.2A | 9 – 25 Ah |
| SR100B48 | 55.2 | 58.8 | 1.7A | 6 – 20 Ah |
| ¹ May be adjusted to suit battery specifications ² Check manufacturer’s recommendations | ||||
| ELECTRICAL | |
| Input | STANDARD: 180V – 264VAC |
| OPTIONAL: 88V – 132VAC | |
| Frecuency | 45-65Hz |
| Fusing | Internal AC input fuse |
| Isolation | 1KV DC input – output / earth |
| Efficiency | > 85% |
| Inrush current | <30A, 1.8ms |
| Output power | 100W |
| Output voltages | Refer to the model table |
| Voltage adj. range | Approx 95 – 105% of V nominal |
| Temp. Compensation | Temperature sensor on 1.7m lead with adhesive pad: -4mV / °C / cell ±10% |
| Current Limit | Straight line current limit profile (output side) |
| Output Protection | Automatic shutdown if battery leads reversed or short circuit on output |
| Line regulation | <0.04% over input range |
| Load regulation | <0.5% open circuit to 100% load |
| Noise | <0.3% |
| Transient response | 200mV over / undershoot, load step 20-100%, 400us settling time |
| Hold-up time | 15 – 20 ms (nom. – max. Vin) without battery |
| FEATURES | |
| LED Indication | BOOST: Red |
| FLOAT: Green | |
| Factory Programmable parameters (default settings shown in brackets; please note that some parameters are interdependent of each other) | Start up in boost mode (Boost) |
| Current terminated boost (Yes) | |
| Current initiated boost (Yes) | |
| Start in boost on mains return (Yes) | |
| Pre-boost state timer (1 minute) | |
| Max boost charge time (24 hours) | |
| Pre-float state timer (1 minute) | |
| Resume prior state upon mains return timer (10 minutes) | |
| Resume on boost charge upon mains return (24 hours) | |
| Delay before mains fail recognition (5 mins) | |
| ENVIRONMENTAL | |
| Operating temperature | Standard: 0 to 50 °C ambient at full load ,De-rate linearly >50 °C to no load @ 70 °C |
| Storage temperature | -10 to 85 °C ambient |
| Humidity | 0 – 95% relative humidity non-condensing |
| Cooling | Natural convenction |
Helios Power Solutions can deliver power solutions where you need them, backed by in-house design, manufacturing, distribution, professional services and the best in-market technical customer support throughout New Zealand, Australia, Asia and the Middle East.
Helios Power Solutions is a leading provider of power solutions and offer one of the widest ranges of power products on the market for any application across all industry sectors for over 30 years. Get in touch today!
Helios Power Solutions offer one of the widest ranges of power products on the market for any application, across all industry sectors. Over 50% of our products are not listed on the website. Get in touch to help us find what you are looking for!
Unit 6, 2-8 South St,
Rydalmere,Sydney,
NSW, Australia, 2116
3 Heremai Street,
Henderson, Auckland,
New Zealand, 0612
56A Boat Quay
Singapore, 049845
105-01 Emaar Sq – Bldg. 4,
Sheikh Mohammed Bin Rashid Bvld Downtown Dubai, UAE
