TDK – Lambda GEN10-15 kW

Laboratory Power Supplies: 10 kW -15 kW

The TDK – Lambda Genesys™ 3U Full-Rack (GEN-3U) series of 15kW DC Programmable Power Supplies provides high power density (up to 15kW) with a complete set of user-friendly interfaces within a 3U profile.

This series offers Output voltages from 30V (@ 500A) to 1500V (@ 10.0A) in a Three-phase 208VAC Input (180-253VAC, 47-63Hz), a Three-phase 400VAC Input (342-440VAC, 47-63Hz) and a Three-phase 480VAC Input (432-528VAC, 47-63Hz) all with Passive Power-Factor Correction (0.88 @ rated load).

Multiple remote programming methods are available including the built-in Remote Analog Program/Monitor and Remote Digital Serial Communication (RS-232/RS-485) Interfaces along with the optional LXI certified LAN, IEEE (IEEE 488.2 & SCPI compliant) and Isolated Analog (5V/10V and 4-20mA) Interfaces.


ModelOutput Voltage (Vdc)Output Current (Adc)Output Power (kW)
GEN 7.5-10000~7.50~10007.5
GEN 10-10000~100~100010
GEN 12.5-8000~12.5 0~80010
GEN 20-5000~200~50010
GEN 25-4000~250~40010
GEN 30-3330~300~33310
GEN 30-5000~300~50015
GEN 40-2500~400~25010
GEN 40-3750~400~37515
GEN 50-2000~500~20010
GEN 50-3000~500~30015
GEN 60-1670~600~16710
GEN 60-2500~600~25015
GEN 80-1250~800~12510
GEN 80-187.50~800~187.515
GEN 100-1000~1000~10010
GEN 100-1500~1000~15015
GEN 125-800~1000~8010
GEN 125-1200~1000~12015
GEN 150-660~1250~6610
GEN 150-1000~1250~10015
GEN 200-500~1500~5010
GEN 200-750~1500~7515
GEN 250-400~2500~4010
GEN 250-600~2500~6015
GEN 300-330~3000~3310
GEN 300-500~3000~5015
GEN 400-250~4000~2510
GEN 400-37.50~4000~37.515
GEN 500-200~5000~2010
GEN 500-300~5000~3015
GEN 600-170~6000~1710
GEN 600-250~6000~2515
GEN 800-12.50~8000~12.510
GEN 800-18.80~8000~18.815
GEN 1000-100~10000~1010
GEN 1000-150~10000~1515
GEN 1250-80~12500~810
GEN 1250-120~12500~1215
GEN 1500-6.70~15000~6.710
GEN 1500-100~15000~1015


Input Voltage / Frequency (range)208VAC (180-253), 400VAC (360-440 , 342-440 (select 10kW/15kW models)), 480VAC (432-528); 47-63Hz (all)
No. of phases3-Phase (Wye or Delta) 4 wire total (3-Phase and 1 protective Earth ground)
Dropout Voltage180 / 360, 342 (select models) / 432; select models (10kW): 800V-1500V, select models (15kW): 30V-50V, 800V-1500V
Input Current (180VAC/360 or 342VAC/432VAC)10kW – 45/23/20 (Vout < 600V); N/A/23/20 (800V < Vout < 1500V) – at full rated Output power 15kW – 64/32/27 (Vout < 600V); N/A/32/27 (800V < Vout < 1500V) – at full rated Output power
Inrush CurrentNot to exceed full rated Input current (see para. above)
Power Factor0.88 Passive (typical)
Leakage Current3.5 (EN60950) max.
Input Protection208VAC: circuit breaker (Vout < 600V); 400VAC/480VAC (all models) – line fuse
Input Overvoltage ProtectionUnit shall not be damaged by line overvoltage of 120% nominal AC input voltage with maximum duration of 100usec.
Phase Imbalance≤ 5% on Three-Phase Input
Operating Temperature0 ~ +50°C, 100% load
Storage Temperature-20 ~ +70°C
Operating Humidity20 ~ 80% RH (non-condensing)
Storage Humidity10 ~ 90% RH (non-condensing)
Vibration & ShockASTM D4169, Standard Practice for Performance Testing of Shipping Containers and Systems, Shipping Unit: Single Package Assurance Level: Level II; Acceptance Criteria: Criterion 1 – No product damage Criterion 2 – Packaging is intact, Distribution Cycle: 12 – Air (intercity) and motor freight (local), unitized is used.
AltitudeOperating: +50°C up to 7500 ft. (2500m), +45°C from 7501 to 10,000ft (2501m – 3000m), Non-Operating 40,000 ft (12,000m)
Audible Noise65dBA at Io(rated) (measured 1m from front panel)

Ask for Assistance

Selecting the right power supply for your application is not a small task. Let our technical sales engineers guide you through the process of choosing the right solution for your needs.

Below some parameters usually required to size and select the right power supply:

  • Power & control requirements
  • Output & Input Voltage / Multioutput Voltage / Variable Voltage
  • Redundancy level
  • Mounting
  • Inrush Current
  • Environmental specifications (Temperature, altitude, vibration, shock)
  • Specific Industries Standards (Railway, Military, Medical)
  • Terminals

Contact Our Team

Contact our team of experienced engineers to discuss your unique power conversion and backup needs. We offer a wide range of highly reliable components that can be integrated and customized to create a solution that meets or exceeds your requirements.

For power automation systems please contact us at

You may also like...