The SPH150 series power supplies are designed specifically for use with LED applications and available with output voltage options from 12 ~ 48VDC.

These units can operate in Constant Voltage or Constant current mode and output voltage & current is fully adjustable, providing total flexibility.

Electronic protection turns off the power supplies in case of short circuit or overload, as well as open circuit or over temperature.
These units are designed to be hard wired in fixed installations, or with an optional power cord, that can be connected to the input terminals with a standard AC plug, for easy installation to any GPO socket/outlet.

SERIES TABLE

ModelOutput (V)         Output (A)Power (W)
SPH150-12A12V12.5A150W
SPH150-15A15V10A150W
SPH150-24A24V6.3A150W
SPH150-36A36V4.2A150W
SPH150-48A48V3.2A150W

SPECIFICATIONS TABLE

Input Voltage90 ~ 305VAC
Frequency47~63Hz
Input Current0.96A @ 230VAC
Output V/ASee table
Output Power150 watts
Output Ripple & Noise12V @ 500mV, 15V @ 600mV,
24V @ 800mV, 36 & 48V @ 1000mV
Output Current Tolerance±5%
Line Regulation±2%
Load Tolerance±3%
Rise TimeTypically 30ms ( max 500ms 10-90% voltage )
Hold Up TimeTypically 15mS at 230V input
Power Factor> 0.95
EfficiencyModel Dependent 87 ~ 89%
Inrush CurrentCold start 80A @ 230V
Leakage Current0.75mA @ 230V 50Hz
Protection:
Over Current1.1 ~ 1.6% times rated current. ( Auto Recovery )
Short CircuitHiccup mode with auto recovery
OvervoltageYes. Recycle input power after approx 30sec
Over TemperatureRecycle input power after unit has cooled off
Operating Temp.-40ºC ~ +70ºC  ( 80% load at +70ºC )
Humidity5~95% RH
Temp Coefficient±0.05% per ºC
IP RatingIP65 ( IP66 option)
CoolingFree air convection
ConnectionsInput & Output flying leads
Input Power Cord & Plug – Option
SafetyEN61347-1, EN61347-2-13
Isolation VoltageInput – Output: 5.3KV DC 1min.
EMCEN55015 Class B
ImmunityEN61000-4-2
HarmonicsEN6100-3-2
MTBF225Khrs per MIL-HDBK-217F ( 25º C )
Mechanical222 x 62 x 37mm  1kg