FLEX-POWER

Modular, Multi-output AC-DC Power Supply 400W – 2500W

The fleXPower series is a range of modular power supplies which can be configured into a bespoke solution for quick delivery of samples, prototypes and low volume production.

The range consists of 8 power platforms ranging from 400W to 2400W and 14 modules ranging from 3.3V at 66W to 60V at 750W. The modules can be placed in series or in parallel to give a single output at the chassis rating. Modules of unlike power can be paralleled and will current share within 10%.

Signals are floating and allow for configuration as active low or active high and include AC OK, global DC OK, module DC OK and current monitor. There is a global inhibit signal which can alternatively be configured as a global enable.fleXPower consists of a chassis of the required power level in which there are 10 slots in versions rated up to 700W, 12 slots for the 900W version, 14 slots for the 1000W version and 16 slots in the 1500 W version. An extra 200W of power is available from X4, X5, X7, X9 & X10 chassis at high line and an extra 1000 W is available from the X15 chassis at high line.

fleXPower chassis can be specified as industrial or medical types. Industrial versions have EN60950 and UL60950 approvals and also meet the requirements of EN61010. Medical versions are approved to EN60601-1 and UL60601-1 and also meet the EMC requirements specified in UL60601-1-2 2nd Edition.

 

SPECIFICATIONS TABLE

Dimensions X4-7: 10.00 x 5.00 x 2.50 in (254.0 x 127.0 x 63.5 mm)
X9: 10.00 x 6.00 x 2.50 in (254.0 x 152.4 x 63.5 mm)
X10: 10.00 x 7.00 x 2.50 in (254.0 x 177.8 x 63.5 mm)
X4-7DD: 10.00 x 5.20 x 5.00 in (254.0 x 132.1 x 127.0 mm)
X9DD: 10.00 x 6.20 x 5.00 in (254.0 x 157.5 x 127.0 mm)
X10DD: 10.00 x 7.00 x 5.00 in (254.0 x 177.8 x 127.0 mm)
X15: 11.00 x 5.00 x 5.00 in (279.4 x 127.0 x 127.0 mm)
Input Voltage: 85-264 VAC (120-370 VDC). Full power at 90 VAC, derate by 10% at 85 VAC
Efficiency: Up to 89%
Operating Temp:  -20 °C to +70 °C. For operation above +50 °C, derate linearly to 50% load at +70 °C. Reverse air option derate from +40 °C to half load at +60 °C
Isolation 4000 VAC Input to Output 2 x MOPP
1500 VAC Input to Ground 1 x MOPP
250 VDC Output to Ground
European Safety Approvals: EN60601-1, EN60950
US Safety Approvals: ANSI/AAMI ES60601-1, CSA22.2 No.60601-1 per cUL, Including Risk Management (XM Models), UL60950 (X Models)
EMC: X version: EN55022 (CISPR22) Class B conducted
XM version: EN55011 (CISPR 11) Class A conducted

Related Products