HWSP300 – HWPS600 Series

Peak Power AC/DC Power Supplies Single Output: 300W – 600W

Backed by the same limited lifetime warranty as the HWS series, the HWS300P and HWS600P models offer a 300% peak power rating for 5 seconds. The HWS-P series deliver average power levels of 300 and 600W and are available with 24V, 36V and 48V output voltages.

Key Market Segments & Applications

  • Factory Automation
  • Process Control
  • Semiconductor Fabrication
  • Motor and Pump Drives

 

SERIES TABLE

ModelVoltage VAdjust Range VMax Avg. Current AOvervoltage V
HWS300P-2424V19.2 – 26.412.527.6 – 32.4
HWS600P-2424V19.2 – 26.42527.6 – 32.4
HWS300P-3636V28.8 – 39.68.441.4 – 48.6
HWS600P-3636V28.8 – 39.616.741.4 – 48.6
HWS300P-4848V38.4 – 52.86.355.2 – 64.8
HWS600P-4848V38.4 – 52.812.555.2 – 64.8

SPECIFICATIONS TABLE

Input Voltage Range85 – 265VAC (47 – 63Hz) or 120 – 330VDC
Input Current (Typ)See Datasheet
Inrush Current20 /40  100/200VAC
Power FactorMeets EN61000-3-2
Temperature Coefficient<0.02%/°C
Overcurrent ProtectionSee Datasheet
Overvoltage ProtectionSee Datasheet
Hold Up Time (Typ)20 ms
Leakage Current (max)<0.75mA (Typically 0.2mA at 100VAC)
IndicatorGreen LED = ON
Operating Temperature (with cover)-10°C to +70°C, derate linearly to 50% load from 50°C to 70°C
Storage Temperature-30°C to +85°C
Humidity (non condensing)Operating: 10 – 90%RH, Non operating 10 – 95%RH
CoolingInternal fan
Withstand VoltageInput to Ground 2.5kVAC, Input to Output 3kVAC, Output to Ground 500VAC for 1 min.
Isolation Resistance>100MΩ at 25°C & 70%RH, Output to Ground 500VDC
Vibration (non operating)10 – 55Hz (1 minute sweep), 19.6m/s2 constant X, Y, Z 1 hour
Shock< 196.1 m/s2
Safety Agency ApprovalsUL60950-1, CSA60950-1, EN60950-1, EN50178, CE Mark
Line DipComplies with SEMI F47 (200VAC line only)
Conducted & Radiated EMIEN55011 / EN55022, FCC VCCI Class B
ImmunityIEC61000-4-2, -3, -4, -6 (Level 3), -5, -8 (Level 4), -11
Weight (Typ)See Datasheet
Size (HxWxD) (with cover)See Datasheet
MTBFSee Datasheet

Ask for Assistance

Selecting the right power supply for your application is not a small task. Let our technical sales engineers guide you through the process of choosing the right solution for your needs.

Below some parameters usually required to size and select the right power supply:

  • Power & control requirements
  • Output & Input Voltage / Multioutput Voltage / Variable Voltage
  • Redundancy level
  • Mounting
  • Inrush Current
  • Environmental specifications (Temperature, altitude, vibration, shock)
  • Specific Industries Standards (Railway, Military, Medical)

Contact Our Team

Email us at sales@heliosps.com.au, we will get back as soon as we can.

You may also like...