Military Field-Grade Uninterruptible Power Supply (UPS)

Rugged Power Backup with Lithium Polymer Batteries

SynQor’s Military Field-Grade Uninterruptible Power Supply units are designed for the extreme environmental and demanding electrical conditions of Military/Aerospace applications. SynQor’s UPS incorporates field proven high efficiency designs and rugged packaging technologies. This UPS will accept a wide range of input voltage and frequency values while delivering a well-conditioned AC output to the load. The use of lithium polymer batteries permits the lowest profile and lowest weight solution in its power class. It is designed to comply with a wide range of military standards. Options include two DC outputs, a DC input rated for military 28 VDC sources, and an electronic breaker on the AC output to permit fault-tolerant parallel operation for higher power and/or N+M redundant systems.

UPS Product Features

  • Sealed, weather-proof, shock-proof construction
  • Military Tough, Die-Cast Aluminum Chassis
  • 1250W-1500VA; 2500W-3000VA output power
  • >10 minute run-time at full power
  • Full power operation -20°C to +55°C
  • Shallow Rack full power operation -20°C to +50°C
  • Storage temperature: -40°C to +65°C
  • True on-line double conversion
  • Hot swappable internal battery pack (lithium polymer)
  • Universal AC input: 80-265VAC; 47-65Hz
  • Dual input: AC and optional DC
  • Cold-start with no AC or DC input connections
  • Power factor correction at AC input
  • Pure sinusoidal AC output voltage
  • Handles 0.0 – 1.0 power factor loads and non-linear loads
  • User I/O and Configuration signal ports
  • Up to 3 units can be combined for higher power, voltage or a 3-Phase AC output
  • Up to 32 units can be combined to form a higher power fault-tolerant, glitch-free system, perhaps with N+M redundancy, by ordering with the “AC Output Electronic Breaker” option and the appropriate
    configuration cable

Specification Compliance

UPS units are designed to meet:

  • MIL-STD-704F – Aircraft Electrical Power Characteristics
  • MIL-STD-1399-300B – Interface Std for Shipboard Systems
  • MIL-STD-1275D – Vehicle Electrical Power Characteristics
  • MIL-STD-461F – Electromagnetic Interference
  • MIL-STD-810G – Environmental Engineering Considerations

Options

  • DC input (28Vnom) for dual source
  • 1U Extended battery packs, compatible with UPS-1250, UPS-1500, UPS-3000
    • UPS-1250/1500-H-1U >13.5 minutes of run-time
    • UPS-1250/1500-M-1U >16 minutes of run-time and -40C full operation
  • Wide-range AC input frequency: 47Hz to 800Hz
  • 115Vrms or 230Vrms AC output
  • 50Hz, 60Hz, or 400Hz output
  • DC1: Auxiliary isolated DC output (up to 500W each)
  • DC2: High power DC output parallelable for higher power (UPS‑1500 up to 1250W; UPS‑3000 up to 2500W)
  • Total AC & DC1 & DC2 output power UPS-1500 = 1250W
  • Total AC & DC1 & DC2 output power UPS-3000 = 2500W
  • Shipboard version with floating neutral wire
  • N+1 Redundancy

Series Table AC & DC Output Models

ModelPowerBattery Run-Time @Full Power (80% Power)Height (W x D x H)Weight
UPS-1500-S-1U (1 BAT-0200-S Pack)1250 W/1500 VA>10 min. (>13 min.)1U (17.00” x 21.60” x 1.73”)32 lbs.
UPS-1500-H-1U (1 BAT-0400-H Pack)1250 W/1500 VA>13.5 min. (>18 min.)1U (17.00” x 21.60” x 1.73”)33.8 lbs.
UPS-1500-M-1U (1 BAT-0400-M Pack)1250 W/1500 VA>16 min. (>22 min.)1U (17.00” x 21.60” x 1.73”)33.8 lbs.
UPS-3000-S-1U (1 BAT-0200-S Pack)2500 W/3000 VA>10 min. (>13 min.)2S (17.00” x 13.60” x 3.40”)65 lbs.
UPS-3000-H-1U (1 BAT-0400-H Pack)2500 W/3000 VA>13.5 min. (>18 min.)2U (17.00” x 21.60” x 3.33”)68.6 lbs.
UPS-3000-M-1U (1 BAT-0400-M Pack)2500 W/3000 VA>16 min. (>22 min.)2U (17.00” x 22.22” x 3.40”)68.6 lbs.

Series Table DC Output Models

ModelPowerBattery Run-Time @Full Power (80% Power)Height (W x D x H)Weight
UPS-1250-S-1U (1 BAT-0200-S Pack)1250 W>10 min. (>13 min.)1U (17.00” x 21.60” x 1.73”)32 lbs.
UPS-1250-H-1U (1 BAT-0400-H Pack)1250 W>13.5 min. (>18 min.)1U (17.00” x 21.60” x 1.73”)34.8 lbs.
UPS-1250-M-1U (1 BAT-0400-M Pack)1250 W>16 min. (>22 min.)1U (17.00” x 21.60” x 1.73”)34.8 lbs.

Ask for Assistance

Selecting the right power supply for your application is not a small task. Let our technical sales engineers guide you through the process of choosing the right solution for your needs.

Below some parameters usually required to size and select the right power supply:

  • Power & control requirements
  • Output & Input Voltage / Multioutput Voltage / Variable Voltage
  • Redundancy level
  • Mounting
  • Inrush Current
  • Environmental specifications (Temperature, altitude, vibration, shock)
  • Specific Industries Standards (Railway, Military, Medical)
  • Terminals

Contact Our Team

Contact our team of experienced engineers to discuss your unique power conversion and backup needs. We offer a wide range of highly reliable components that can be integrated and customized to create a solution that meets or exceeds your requirements.

For power automation systems please contact us at power.systems.automation@heliosps.com.au

You may also like...