MINV-4000-1U-28

Military Fiel-Grade Inverter

SynQor’s Military Field-Grade Inverter units are designed for the extreme environmental and demanding electrical conditions of Military/Aerospace applications. SynQor’s MINV incorporates field proven high efficiency designs and rugged packaging technologies. This MINV will accept a DC input voltage while delivering a well-conditioned AC output to the load. It is designed and manufactured in SynQor’s USA facilities to comply with a wide range of military standards. Options include a selection of output voltage amplitudes, frequencies, and an electronic breaker on the AC output to permit fault-tolerant parallel operation for higher power and/or N+M redundant systems.

Helios Power Solutions is Synqor authorized distributor in Australia, New Zealand, Saudi Arabia, Oman, Jordan, UAE, Qatar and Bahrain.

Combine units for Higher Power, Voltage, 3-Phase AC output, and/or Redundancy

MINV Product Features

  • Sealed, weather-proof, shock-proof construction
  • 4000 W (5000 VA) output power
  • Full power operation: -40 °C to +55 °C
  • 28 V nominal DC input
  • 20 V – 33 V input range
  • 18 V – 40 V transient input range
  • Pure sinusoidal AC output voltage (115 Vrms, 60 Hz)
  • Handles 0.0—1.0 power factor loads and non-linear loads
  • Low-power sleep state draws < 500 uA from source
  • Up to 32 units can be combined for higher power, voltage or a 3-Phase AC output
  • Up to 32 units can be combined to form a higher power fault-tolerant, glitch-free system, perhaps with N+M redundancy, by ordering with the “AC Output Electronic Breaker” option and the appropriate configuration cable
  • User I/O and Configuration signal ports
  • Battle Mode for over-temperature events
  • 1U high rack mount unit (17.00 ”W x 22.43 ”D x 1.73 “H)
  • Low weight: 32 lbs

Specification Compliance

MINV-4000 are designed to meet:

  • MIL-STD-1399-300B – Interface Std for Shipboard Systems
  • MIL-STD-810G – Environmental Engineering Considerations
  • MIL-STD-461F – Electromagnetic Interference
  • MIL-STD-704F – Aircraft Electrical Power Characteristics
  • MIL-STD-1275D – Vehicle Elec. Power Characteristics

Options

  • 115 Vrms or 230 Vrms AC output
  • 50 Hz, 60 Hz, or 400 Hz AC output
  • Shipboard version with floating neutral wire
  • Optional Rack Mount Transit Case

Rack Mount Transit Case AC DC Power Supplies DC DC Converters DC AC Inverters Military Applications

  • Optional 6 NEMA Receptacles with Breaker
NETWORK MANAGEMENT PROTOCOLS

Specifications Table

DC Input Characteristics
Steady-State Operating Voltage20-33V
Continuous Maximum Input Current240A (full load, 20V)
Transient Operating Voltage18-40V (500ms @18V)
Transient Maximum Input Current275A
AC Output Characteristics
Total Output Power Continuous4000W (5000VA)
AC Output WaveformPure Sinusoidal
Voltage Line-Neutral115 Vrms ± 3%
230 Vrms ± 3%
Frequency60 Hz ± 0.5%
50 Hz ± 0.5%
400 Hz ± 0.5%
Load Power Factor0-1.0 (leading or lagging)
Total Harmonic Distortion2% (3000 W resistive load)
Mechanical Characteristics
Size1U (17.00” x 22.43” x 1.73”)
Weight32 lbs
Case MaterialAluminium
Environmental Characteristics  MIL-STD-810G
Operating Temperature
Full Rated Power-40 °C — +55 °C
Reduced Power per Figure B-40 °C — +70 °C
Storage Temperature-40 °C — +70 °C

 

Ask for Assistance

Selecting the right power supply for your application is not a small task. Let our technical sales engineers guide you through the process of choosing the right solution for your needs.

Below some parameters usually required to size and select the right power supply:

  • Power & control requirements
  • Output & Input Voltage / Multioutput Voltage / Variable Voltage
  • Redundancy level
  • Mounting
  • Inrush Current
  • Environmental specifications (Temperature, altitude, vibration, shock)
  • Specific Industries Standards (Railway, Military, Medical)
  • Terminals

Contact Our Team

Contact our team of experienced engineers to discuss your unique power conversion and backup needs. We offer a wide range of highly reliable components that can be integrated and customized to create a solution that meets or exceeds your requirements.

For power automation systems please contact us at power.systems.automation@heliosps.com.au