SPS 300 Series

Programmable AC Power Source 2.52A – 165.6A / 150VAC – 600VAC / 1.2W – 20kW

This series programmable Three Phase Input AC source system adopts high speed DSP+CPLD control, high frequency PWM power technology and active PFC design to realize AC/DC stable output, high power up to 20kW.The user friendly interface allows for quick access to AC source’s function through a large graphic LCD display front panel with touch screen or keypad. Can simulate complex AC lines conditions and measure critical product characteristics during testing.. It is able to analogue output normal or abnormal input for electrical device to meet test requirements. Meet the verification of power electronics, motors, lighting, avionics, automotive electronics research and development quality assurance laboratory, as well as the production test verification of factory production line.

Main Features

  • Large colour touch screen with an intuitive interface, easy to operate
  • AC+DC mixed or independent output mode for voltage DC offset simulation
  • Turn on, turn off phase angle control, 0-359.9°
  • Output frequency: 15-1000Hz, capable of setting output slope of voltage and frequency
  • High output current crest factor which is ideal for inrush current testing
  • Standard USB data interface, support CSV file waveform import. Built-in power meter, which is capable of measuring 15 electrical parameters per phase
  • OCP/OVP/OPP/OTP/ short circuit protection. Capable of setting voltage and current output restriction, support for constant current output
  • With reverse current protection to avoid current flowing backward

Series Table

ModelVoltageCurrentPowerStandard Communication InterfaceFrequency RangeSize

Functions & Advantages

Graphical User

The large colour touch screen provides simple and fast operation for customers, real-time update of display output data and power status, and graphical display makes it more intuitive.

Graphical User Interface AC Programmable Power Supply

Settable ON/OFF Phase angle of Output Waveform

This series of AC power supply can set the ON phase and OFF phase of sinusoidal output waveform, suitable for the output test of switching power supply. Set the ON angle to 90 degrees for surge current testing, the power supply will show the measured value of surge current. Users can set when start to measure the surge current and the duration of the measurement.

Settable ON/OFF Phase angle of Output Waveform laboratory power supply

Slew Rate Setting For Voltage and Frequency

This series AC power supply let users set the slew rate of voltage and frequency, in such application in order to reduce the inrush current during motor or compressor startup.

slew rate setting for voltage and frequency AC Benchtop Power Source

Power Sweep Function

This series AC power supply can test the efficiency of switching power supply and capturing the voltage, current, power and frequency at the maximum power operating point, the measurements will be displayed at the end of the sweep.

power sweep function variable ac power supply

Triac Dimmer Function

This series AC power supply built-in triac dimmer function, which is used to do dimming and speed regulating test for lamp or electric motor to ensure the products work well both in R&D and production testing.

Triac Dimmer Function Power Supply

Power Line Disturbance Simulation

List Mode

Power line disturbance list mode

Step Mode

Power line disturbance step mode

Pulse Mode

Power Quality line disturbance simulation pulse mode

Voltage Sag/Voltage Spikes

Power line disturbance simulation voltage sags voltage spikes Laboratory Testing Simulation


File Save and Recall Via the USB Interface

The user can save the screenshot via the USB interface in the front panel. The user can import a CSV file via the USB interface to generate waveform output.

file save ac programmable ac power source

Ask for Assistance

Selecting the right power supply for your application is not a small task. Let our technical sales engineers guide you through the process of choosing the right solution for your needs.

Below some parameters usually required to size and select the right power supply:

  • Power & control requirements
  • Output & Input Voltage / Multioutput Voltage / Variable Voltage
  • Redundancy level
  • Mounting
  • Inrush Current
  • Environmental specifications (Temperature, altitude, vibration, shock)
  • Specific Industries Standards (Railway, Military, Medical)
  • Terminals

Contact Our Team

Contact our team of experienced engineers to discuss your unique power conversion and backup needs. We offer a wide range of highly reliable components that can be integrated and customized to create a solution that meets or exceeds your requirements.

For power automation systems please contact us at power.systems.automation@heliosps.com.au

You may also like...