New Dual Output DC Power System for Wireless Comms Networks

48V And 24V DC Power System With Integrated 12V Or 24V DC Converter

Managing your backup system and critical loads with two different voltage levels is now possible with the new ICT Hybrid Ultra and ICT Hybrid Power Series. The dual output voltage configuration brings more flexibility while maintaining a high level of reliability with the standard battery management features and ethernet enabled monitoring capabilities.

The new series are ideal for restricted space applications where the primary DC voltage is positive or negative 48V or 24V DC, and auxiliary voltage of 12V or 24V DC is required to power certain devices at the site.

ICT Hybrid Ultra Series

Hybrid Ultra Power Series up to 7.5kW 24V 48V 12V loads

Up to 7500W output Power
700W/1500W AC-DC Power modules – 48V or 24V DC output
700W DC-DC Converter Module – 12 VDC output
Dual 100 amp battery breakers with battery management module
4 or 8 fully managed load outputs
Digital and analog inputs for temperature and site sensors
Full range of certifications including CSA/UL, FCC Class B, CE, ROHS

ICT Hybrid Power Series

Hybrid Power Series -1U Rack Dual Output DC Power System 24V 48V 12V

Up to 3000W output Power
700W/1500W AC-DC Power modules – 48V or 24V DC output
700W DC-DC Converter Module – 12 VDC output
Dual 100 amp battery breakers with battery management module
Digital and analog inputs for temperature and site sensors
Full range of certifications including CSA/UL, FCC Class B, CE, ROHS

Applications

Two-way Communications Networks

Trunked Radios Systems

Backhaul

DAS

SCADA

Security & Surveillance

Main Features of Modules

Integrated Intelligent Control Module – ICM Controller

TCP/IP remote Ethernet communications for monitoring and control
Embedded web server for plug and play set up
HTTP/HTTPS, SMTP, SNMPv1/v2c/v3 protocols supported
AC input voltage, DC output voltage, system current reporting (local and Ethernet)
Four site monitoring sensor inputs with alarm reporting
Local and remote output voltage and current limit adjustment
Up to 30 days logging at 1 minute sampling rate, csv file download, major event logging

Integrated Load Distribution Module (just for Hybrid Ultra Series)

Display current reading of each of four load outputs
Remote on/off control of individual outputs or entire load bus over Ethernet
User definable alarm level indications (sent via Form C and Ethernet)
User-definable load disconnect and reconnect levels
Definable automatic load shedding
Auto-ping automatic power cycling of specified load outputs
Power-up delay sequencing

Battery Management Module

Temperature-compensated charging
Display of battery voltage status
Battery current, state of charge, run time remaining reporting
Adjust LVD settings
Configure advanced battery management features such as
- Boost charge parameters
- Max charge current
- Battery capacity
- Battery test timer
- Battery discharge test cut-off voltage.

This features are available with Lead Acid batteries. The modular series is compatible with Lithium-ion batteries but battery monitoring and reporting is done by the battery itself. (read Using DC Power Supplies and Battery Chargers with Lithium-ion batteries for more info)