SKUStock Variable Output Voltage Variable Output Current PriceQuantity
GEN30-25Out of Stock - Please contact our Office0-30V0-25A $2,711.00
GEN20-7610-20V0-76A $3,625.00
spinner
GEN40-38Out of Stock - Please contact our Office0-40V0-38A $3,625.00
GEN40-1910-40V0-19A $2,711.00
spinner
GEN60-25Out of Stock - Please contact our Office0-60V0-25A $3,625.00
GEN100-1510-100V0-15A $3,625.00
spinner
GEN150-5Out of Stock - Please contact our Office0-150V0-5A $2,711.00

GEN750-1500

Laboratory Power Supplies: 750W -1500W

The Genesys™ Full-Rack (GEN-1U) series of DC Programmable Power Supplies provides high power density (up to 780W/1560W) with a complete set of user-friendly interfaces within a 1U full-rack profile. It offers Output voltages from 6V (@ 100A/200A) to 600V (@ 1.3A/2.6A) and a wide-range AC Input (85-265VAC, 47/63Hz) with Active Power-Factor Correction (0.99 @ rated load).

Constant-Current (CC) or Constant-Voltage (CV) Variable DC Power Supply

These units can operate in either Constant-Current (CC) or Constant-Voltage (CV) mode with a user-friendly front panel interface (continuous encoders for FINE and COARSE adjustment and four-digit LED Voltage and Current meters) and provide safety features such as Safe/Auto Re-Start, Last Setting Memory and built-in protective functions (OVP, UVL, Current FOLDback, OTP and AC Low-Line).

Remote Monitor & Control

Multiple remote programming/monitor/control methods are available including the built-in J1 Remote Analog and the RS232/RS485 Multi-Drop Remote Digital Interface (where up to 31 units may be controlled). Other Optional Remote Digital Interfaces (LAN, IEEE and USB) and Isolated Analog (5V/10V and 4-20mA) Interfaces are optional and factory installed (one per power supply). Instrument Software Drivers (NI LabView and NI LabWindows) are also available.

WeightN/A
Dimensions436 × 422.8 × 44 mm
Variable Output Voltage

, , , , ,

Variable Output Current

0-5A, 0-15A, 0-19A, 0-25A, 0-38A, 0-76A

SERIES TABLE

ModelOutput Voltage (VDC)Output Current ( A )Output Power ( W )
GEN6-1000~6V0~100600
GEN6-2000~6V0~2001200
GEN8-900~8V0~90720
GEN8-1800~8V0~1801440
GEN12.5-600~12.5V0~60750
GEN12.5-1200~12.5V0~1201500
GEN20-380~20V0~38760
GEN20-760~20V0~761520
GEN30-250~30V0~25750
GEN30-500~30V0~501500
GEN40-190~40V0~19760
GEN40-380~40V0~381520
GEN50-300~50V0~301500
GEN60-12.50~60V0~12.5750
GEN60-250~60V0~251500
GEN80-9.50~80V0~9.5760
GEN80-190~80V0~191520
GEN100-7.50~100V0~7.5750
GEN100-150~100V0~151500
GEN150-50~150V0~5750
GEN150-100~150V0~101500
GEN300-2.50~300V0~2.5750
GEN300-50~300V0~51500
GEN600-1.30~600V0~1.3780
GEN600-2.60~600V0~2.61560

SPECIFICATIONS TABLE

 Input voltage/freq. (*1) 85~265Vac continuous, 47~63Hz, single phase
Power Factor0.99 @100/200Vac, rated output power.
EN61000-3-2,3 compliance Complies with EN61000-3-2 class A and EN61000-3-3 at 20~100% output power.
Input current 100/200Vac750W :10.5A / 5A, 1500W :21A / 11A
Inrush current 100/200Vac750W :Less than 25A, 1500 W :Less than 50A
Hold-up timeMore than 20mS, 100Vac, at 100% load
Parallel OperationUp to 4 units in master/slave mode with single wire current balance connection
Series OperationUp to 2 units. with external diodes. 600V Max to Chassis ground
Operating temp0~50°C, 100% load
Operating humidity30~90% RH (non-condensing)
 VibrationMIL-810E, method 514.4, test cond. I-3.3.1. The EUT is fixed to the vibrating surface.
ShockLess than 20G, half sine, 11mSec. Unit is unpacked.

Ask for Assistance

Selecting the right power supply for your application is not a small task. Let our technical sales engineers guide you through the process of choosing the right solution for your needs.

Below some parameters usually required to size and select the right power supply:

  • Power & control requirements
  • Output & Input Voltage / Multioutput Voltage / Variable Voltage
  • Redundancy level
  • Mounting
  • Inrush Current
  • Environmental specifications (Temperature, altitude, vibration, shock)
  • Specific Industries Standards (Railway, Military, Medical)
  • Terminals

Contact Our Team

Contact our team of experienced engineers to discuss your unique power conversion and backup needs. We offer a wide range of highly reliable components that can be integrated and customized to create a solution that meets or exceeds your requirements.

For power automation systems please contact us at power.systems.automation@heliosps.com.au

You may also like...