Hybrid Power Series Dual Output DC Power System for wireless communication networks

Product Information

  • Intelligent 1U Power Shelf with integrated Intelligent ethernet controller
  • One or two hot swappable 48V or 24V primary DC output power modules
  • 700W 12V or 24V integrated DC output converter
  • TCP internet & Advanced battery management features are standard on every model – Check Out Software Demonstration 
  • Ideal for integration with Smart Dual Bus DC Distribution panels for fully managed DC loads
  • For higher output power requirements check out the Hybrid Ultra Series
Hybrid Power Datasheet ICM (Intelligent Control Module) Datasheet
Request a Quote
SKU: HYBRID-POWER-SERIES
Categories: , , , , , ,
Description

Hybrid Power Series

48V and 24V DC Power System with integrated 12V or 24V DC Converter

Many wireless communications sites require different DC voltages to power a range of devices, whether 48, 24 or 12 volts DC. This often means installing multiple power supplies or DC converters which may not always be feasible given limited rack space or budgets.

Fully Controllable and Monitorable Dual Output DC Power System with Advanced Battery Management

The ICT Hybrid Power Series combines a 48 or 24 volt DC power system with a factory installed 12 or 24 volt DC converter module to provide up to 3,000 watts maximum power flexible hybrid DC solution for wireless network sites. The Hybrid Power Series accepts one or two hot swappable 48 or 24 volt, 700 watts or 1,500 watts DC Power Modules.

The integrated DC converter provides up to 700 watts of 12 or 24 volts DC output through a separate output bus bar.  Ethernet-based communications and control is standard on every model. System and battery monitoring are provided through a secure web-based server or SNMP. Outputs can be turned off and on, and various parameters can be controlled and managed remotely.

Hybrid Power Series -1U Rack Dual Output DC Power System 24V 48V 12V

Applications

  • Wireless two-way communications networks
  • Trunked radio systems
  • Microwave
  • Backhaul
  • DAS
  • Security and surveillance
  • Automation
  • SCADA
  • Protection and control

Other features

  •  90 to 93% efficiency
  • -30 C to +60 C operating temperature range
  • TCP/IP Ethernet is standard on every model – provides complete and easy-to-use remote monitoring and control of the power system using built-in web server and graphical user interface or SNMP
  • Battery Backup with 150A LVD and adjustable disconnect and reconnect voltage setpoints
  • Single or Dual 100A battery disconnect breakers
  • User Adjustable output voltages and battery charge current limit
  • Compatible with Lithium-ion batteries but battery monitoring and reporting is done by the battery itself. (read Using DC Power Supplies and Battery Chargers with Lithium-ion batteries for more info)
  • Advanced Battery Management (for lead acid batteries)
    features
    • Battery state of charge and charge current reporting
    • Estimated run-time remaining
    • Battery discharge testing
    • Temperature compensated charging
  • Digital and Analog inputs for temperature and site sensors
  •  Full range of certifications including CSA/UL, FCC Class B, CE, ROHS

For a fully controllable and monitorable DC System, use our Dual Bus DC Distribution Panels

Distribution-Series 3 Dual-Bus DISICT200DB-12IRC - Australia DC Load Distribution Panel 12V 24V 48V SNMP TCP/IP ICT200DF-12 ICT200DB-12 ICT200DF-12IRC ICT200DB-12IRC

DC Distribution Series 3 Dual Bus 160A, 10-60VDC

$863.00 – $1,940.00
Additional information
Weight3.7 kg
Dimensions483 × 398 × 44 mm
NETWORK MANAGEMENT PROTOCOLS

Specifications Table

Specifications Table

 

AC INPUT
Nominal system voltage120/240VAC
Input voltage range100-300VAC
Power factor (typical)0.99
Frequency50/60Hz
DC OUTPUT
See datasheet
MECHANICAL
AC input connectorTerminal Block, #8 – #16 AWG
DC output connectorBusbars with 1/4-20 x 7/8” bolts
Remote alarm connectorsTerminal Block (#16 -24 AWG)
Mounting1RU, 19 in rack mount
Weight (Power Shelf empty)8.1lbs / 3.7 kg
Weight (Power Shelf + 4 modules)3.7kg
Dimensions – H X W X L 1.74 x 19.0 x 15.7 in. / 44 x 483 x 398 mm
ENVIRONMENTAL
Operating temperature range -30º to +60ºC
Output derating2% / ºC (above 50º C)
Storage temperature   -45º to +85ºC
DESIGN STANDARDS
SafetyEN 60950-1
EmissionsEMC compliance with FCC Part 15, Class B, EN61000-6-1, EN61000-6-3, EN61000-3-2, RoHS, CE
Series Table

Series Table

Ordering InformationPrimary Output Voltage (nominal)Converter Output Voltage (Floating)Managed Load Outputs
System VoltageNegative V OutputPositive V Output
Intelligent Power Chassis with Ethernet Controller, dual 100A battery breakers with LVD
and 700 watt 12 volt DC secondary converter output. Accepts up to 4 Power Modules.		48 or 24 VDCICT-2U4-DC12ICT-2U4P-DC1212 VDC8
Intelligent Power Chassis with Ethernet Controller, dual 100A battery breakers with LVD
and 700 watt 24 volt DC secondary converter output. Accepts up to 4 Power Modules.		48 or 24 VDCICT-2U4-DC24ICT-2U4P-DC2424 VDC8
Intelligent Power Chassis with Ethernet Controller, dual 100A battery breakers with LVD
and 700 watt 12 volt DC secondary converter output. Accepts up to 5 Power Modules.		48 or 24 VDCICT-2U5-DC12ICT-2U5P-DC1212 VDC4
Intelligent Power Chassis with Ethernet Controller, dual 100A battery breakers with LVD
and 700 watt 24 volt DC secondary converter output. Accepts up to 5 Power Modules.		48 or 24 VDCICT-2U5-DC24ICT-2U5P-DC2424 VDC4
Power Module, 48 VDC, 700W output, hot swappableICT700-48PM
Power Module, 24 VDC, 700W output, hot swappableICT700-24PM
Power Module, 48 VDC, 1500W output, hot swappableICT1500-48PM
Power Module, 24 VDC, 1500W output, hot swappableICT1500-24PM
Optional blanking panel for unused Power Module positionsICT-BPM
Ask for Assistance

Ask for Assistance

Selecting the right power supply for your application is not a small task. Let our technical sales engineers guide you through the process of choosing the right solution for your needs.

Below some parameters usually required to size and select the right power supply:

  • Power & control requirements
  • Output & Input Voltage / Multioutput Voltage / Variable Voltage
  • Redundancy level
  • Mounting
  • Inrush Current
  • Environmental specifications (Temperature, altitude, vibration, shock)
  • Specific Industries Standards (Railway, Military, Medical)
  • Terminals

Contact Our Team

Contact our team of experienced engineers to discuss your unique power conversion and backup needs. We offer a wide range of highly reliable components that can be integrated and customized to create a solution that meets or exceeds your requirements.

For power automation systems please contact us at power.systems.automation@heliosps.com.au

You may also like...

MPS Ultra - 2U Rack Mount Redundant Hot Swap Modular DC Power System 12V 24V 48V

MPS Ultra – 2U Redundant Hot Swap Modular DC Power System up to 12kW

24 48 VDC Modular Power Series with DC Distribution

24V & 48V Modular Power Series DC Power System: 700W – 6000W

12VDC Modular Power Series with DC Distribution - 1U Rack Mount DC Power Supply

12V Modular Power Series DC Power System: 700W – 4900W

Hybrid Ultra Dual Output DC Power System

Hybrid Ultra Series – up to 7.5kW Dual Output DC Power System 48/24-12Vdc

© Copyright Helios Power Solutions 2023